How To Turn On Sprinkler System For Spring

Monday, August 23, 2021

How To Turn On Sprinkler System For Spring

The valve to turn on the water is usually near your water meter inside the house. Open the main valveslowly open the main shutoff valve to let water into the sprinkler system.

Sprinkler valve repair, this is an example of a irrigation

Here’s how to start up your lawn sprinkler this spring:

How to turn on sprinkler system for spring. Close the spigot on your backflow. Fortunately, this scenario is easy to avoid. Also, remember to water the lawn when dry.

Typically, this is located outside where the water lines leave your home. Turning your sprinkler system back on in the spring requires expertise and patience, to avoid damaging the system. Just a few simple steps before you turn on your irrigation system will protect it from immediate and unforeseen damage, as well as make it more reliable year after year.

Slowly open the gate valve. Open the cover of the sprinkler timer. Go into your garage and locate the galvanized plug or spigot that is on top of the irrigation controller.

Open the front cover of your sprinkler timer, find the battery backup (if it has one) and replace. That’s why you need to have an idea of the time the temperature tends to drop in your city. Close the drain and turn the water on.

Simply put, you must turn your sprinklers on when temperatures are over 32 degrees fahrenheit. Winterization (includes blowing lines to vacate all water from the system, and protect from freeze damage).; When starting up a sprinkler system in the spring, the technician will conduct an inspection to find any broken sprinkler heads, broken pipes or leaks.

Having your sprinkler system started up for the season early will eliminate thirsty plants when the rain stops. Teflon tape or plumbers putty. Slowly open until water comes out of bell at the top then quickly open to pressurize valve.

Start at the sprinkler’s main panel. Make a note of the current settings and change them to meet your lawn and landscape’s spring watering needs. Turn the valve handle slowly to fill the lines between there and the backflow preventer.

This is the fully open position. 4.once the line is filled, go to the. Schedule your lawn sprinkler blowout now.

Follow the instructions in your sprinkler’s timer manual. You want to override the automatic settings by turning on the manual cycle so you can slowly let the water flow throughout the irrigation system. The time required to turn on the irrigation system may be as little as 30 mins up to a couple of hours depending on the size and complexity of the system.

When the time comes that watering must begin, all you have to do is turn the dial on your controller to the on position and you will be ready to water, ensuring you have a lush green lawn and a healthy landscape. As we turn on the irrigation system, we allocate water use, so plants receive. Go through all the zones one at a time.

Always remember to fill your sprinkler lines slowly. This valve is usually found inside, near the place where your water lines leave the house. When winter is around the corner and the first frost will be here soon, it’s time to call sprinkler solutions to schedule your lawn sprinkler system winterization.

Steps to turn on the sprinkler system. Check each zone for water coverage, leaky heads and breaks. As you may already know, seasons often have a different impact on the region you live in.

Have a complete residential sprinkler system installed in