How To Wash A Dog Bed Without A Washing Machine

Dry the bed in your dryer, if it will fit. Use a spot cleaner to remove excess dirt and debris.

Tough Bolstered ChewResistant Orthopedic Dog Bed Chew

Your dog bed should be washed in hot water (at least 140° f or 60°c) to kill all germs.

How to wash a dog bed without a washing machine. Use an 8:1 solution of water and apple cider vinegar to refresh between laundering. Use a spot cleaner to remove excess dirt and debris. To prevent the cover from shrinking, line dry outside in the sun or place it in the dryer on air dry or low heat for 15 minutes, then hang until dry.

Place blankets, sheets or towels over the bed to protect it from dirt and to make for easy clean up. If the bed is really dirty or if there isn't a removable cover, you may need to wash the entire. If you feel that the bed stinks a lot, you can add ½ cup of vinegar more into the water.

Vacuum the dog bed before washing to remove any dirt. Vacuum your dog bed for any excess dirt or fur. A dryer sheet helps reduce static and will remove any remaining hair.

You can also wash it by hand in the bathtub with warm water and follow the instructions above. How to clean a dog bed without a removable cover. Pet beds with removable covers can be washed once in three months in the washer as covers are washed often.

Work on the loose dirt first by dusting and vacuuming the dog bed Just throw the entire bed into the washing machine and watch it become fluffy and clean again. Begin by allowing it to soak in very hot.

The instructions will specify whether to wash by hand, machine or dry cleaning. Soak your dog bed in the water. Clean a dog bed properly.

Moreover, most dog beds come with covers that reduce the workload when washing since all you have to do is throw them into the washing machine. You should also consider your pet’s activity level, how much they shed, the amount of time they spend outdoors and if. Yes, there are lots of good beds out there that are washable with the right cleaning accessories.

When learning how to wash a dog bed, you can simply remove the cover and throw it in the washing machine. Dry and fluff the dog bed to retain its original shape. The heated water can destroy the pests and any eggs or larvae.

We also have others that shouldn’t be machine washed. But the challenge is on how to clean a dog bed without a removable cover. How to clean a dog bed without a removable cover clean a dog bed properly.

Fill the tub with hot water and put ¼ cup of vinegar and a small quantity of a laundry detergent. You should read the bed’s cleaning instructions or inquire from the. Cleaning a dog bed with a removable cover is relatively easy.

How to wash a dog bed easy steps to clean a dog bed: Washing a dog bed without a removable cover. When you’re ready to wash the bed, just throw it in the washing machine, and the bed will be like new in no time.

When washing a dog bed cover, put it in a. To wash your dog's bed with white vinegar or apple cider, remove the cover and directly place the foam bed into a bathtub. If it is small enough, place the dog bed into a washer.

Remove cover from the dog pillow if you are able to and put the cover and bed insert into the washer. Wash the dog bed in hot water if your canine has fleas, ticks or mange. If your dog bed has a removable cover then you can simply remove it and wash it in your washer with effective detergents.

Wash in hot water but be sure to confirm by reading the cleaning instructions. If you don’t have a tub you can also use a very large bucket, washbowl, or some other type of container. Vacuum the dog bed before washing to remove any dirt.

The images that existed in kirkland dog bed washing instructions are consisting of best images and high environment pictures. In addition, the bed may also require an application of insecticide spray to completely eliminate the bugs. Use an 8:1 solution of water and apple cider vinegar to refresh between laundering.

A good guideline to follow: If you do use a dryer, do not use dryer sheets. How to clean a dog bed without a removable cover.

So, the question as to if you can wash a dog bed or not wash your dog bed depends on your manufacturer’s specifications. If the dog bed has not been washed in a while or has more dirt or odor than normal you should add an extra wash cycle. Washing in hot water can help kill any insects and eggs that may be on the bed.

You can wash your dog’s bed by hand if you do not have a machine. If you are handwashing your dog bed, soak it in warm or hot water for 15 minutes washing the dog bed with vinegar will remove all the odor. If it is small enough, place the dog bed into a washer.

If the bed is small enough, place the entire bed into your washing machine and follow the manufacturer’s care recommendations on the care label on the bed. You can either throw them on the washer or wash them by hand in a smaller container. Wash your dog’s bed once a week or once every two weeks at minimum.

After washing the dog pillow, you will want to follow up with a cycle of hot water with ½ a cup of bleach before being you throw in a regular load of dirties. When you determining how often you should wash your dog’s bedding. Fill up a large basin or bath with enough water to completely submerge your dog’s bed.

How To Become A Butcher In Ontario

The seaway valley meat cutting institute provides 540 training hours towards your apprenticeship hours. The regulation sets out requirements to ensure that animals are fit for slaughter,.

Vintage Ontario Knife Old Hickory Butcher Skinning

The average salary for a butcher is $17.89 per hour in ontario.

How to become a butcher in ontario. Butcher/meat cutter (retail or wholesale)(noc 6331)*… We provide full accommodations for testing. The information provided below includes an application to become licensed as a meat plant in the province of ontario.

We offer two tracks to cater to complete novices and more advanced meat cutters. While a high school diploma is the minimum. Approximately 8,850 people work in this occupation.

Also, many artisan restaurants and private culinary businesses run butchery workshops, as well. All trademarks contained herein are the property of their respective owners. Our school will use our wide range of contacts to.

Average costs for materials and equipment for butcher block countertops in ontario. Completion of secondary school may be required. How do i become a butcher in canada?

Food and beverage stores (naics 445): Regulation 31/05 (meat) under the food safety and quality act, 2001 is administered by the ontario ministry of agriculture, food and rural affairs (omafra). For further details email [email protected] or call nelson dean on 020 8501 8074 or visit www.waltham.ac.uk for more information.

Ask questions of the master butcher or the butcher craft community. There are many ways to immigrate to canada as a butcher. If you are interested in learning how to get a job as a butcher, then you may want to consider a butcher school.

Clean energy is in our dna. Average labor costs to install butcher block countertops in ontario, oregon. Its purpose is to help ensure that meat processed for consumption in ontario meets food safety requirements.

Anyone thinking about opening a meat plant should contact an omafra area manager. Beef, pork, lamb and poultry. Individuals who want to become a butcher at a retail store will need a minimum of one or two years of on the job training.

That’s where your culinary degree might also come into play. An individual first training to become a butcher will begin their career by completing small and easy tasks at the entry level. Omafra area managers will work with you to advise on the licensing process.

Learn about salaries, benefits, salary satisfaction and where you could earn the most. You don’t have to be a lawyer, you don’t have to be a doctor, become a butcher if you want. Learn at your pace and become a proficient foodie.

“being a butcher is a really good job and the more you know, the more you’re worth. The enthusiast basic butchery track. All contents copyright © 2021 meat & poultry ontario | privacy/disclaimer.

Our knowledgeable instructors have over 30 years experience training our apprentices. Amateur cooks, foodies, chefs, hunters, farmers, bbq enthusiasts, or anyone interested in meat, here is what. Search canadian jobs, explore careers and labour market trends, subscribe to email alerts, sign up for job match, and find tools and resources for employers.

Our small class size allows you to maximize your training. Our online programs allow the learner to gain extensive and valuable knowledge about cutting, merchandising and selling meat. A targeted marketing campaign will drive traffic of independent grocers and butcher shops to the show to sample your best products and discuss how they may get those products on to their shelves.

This butcher block countertops ontario quote includes: Our curriculum is designed using the four major proteins: All project costs (surface preparation, components and machinery), and cleanup fees.

$38.00 to $46.00 per square foot material costs. Meat & poultry ontario 130 malcolm rd guelph, on n1k 1b1 tel: As space is limited to 12 business members, contact derek today for.

How To Change Mercedes Key Battery 2003

Then, slide the key back inside fully, and you’re done! Replace the old battery with the new one, after making sure it’s facing.

How To Replace Volkswagen Beetle Key Fob Battery 2002 2003

Almost bought a new battery.

How to change mercedes key battery 2003. Press lock and unlock button simultaneously and hold for t > 5 s until battery indicator (4) flashes twice (to confirm switchover). Check that you are using the proper key to start your car. Mercedes benz techs can make you a brand new key using our mercedes calibrated key replacement tool.

Press the key into this slot to open the battery compartment. Press button (6) (release for t > 1 s, end t > 0.5 s). If your smart key doesn't seem to be working.

Replace the existing cr 2025 batteries with two new ones. We strongly recommend using a lithium battery like these ones, as they last much longer. At mercedes benz techs, we can make you a brand new key!

Inserting the remote key into the eis will deactivate the panic alarm. Ad smart key 3 button 434mhz for mercedes benz Only the older ‘flip’ mercedes keys can be self programmed.

First you need to identify which key you have. Put your key horizontally into the open slot. The black case will pop open, and you can lift it all the way up and take out the small mercedes key battery.

If you’ve got one of mercedes ‘smart’ keys then you will have to see either a mobile locksmith or a dealership. Replacing the battery is easy and takes less than $20 min. Pull the sliding tab, and pull out the valet key.

13mm socket wrench — you will use this when you take out the bracket that holds the battery in place. Here is a breakdown of the challenges of reprogramming a mercedes key yourself. Like any battery, these batteries sometimes die and need to be replaced.

Cost to replace mercedes battery yourself. Pull on the latch end of the fob and the key should remove on its own. Take the tip of the key and insert it into the flat side of the gap until you feel the case pop open.

Check your key fob battery. Hold the key in your hand by the keychain. After the key releases, there will be a visible slot at the end of the key fob.

Check your key and cylinder step 1: 10mm socket wrench — you will need this to disconnect the battery from the positive and negative terminals. Try that first before you do anything else.

I had the same problem with my 2003 c320. I got my spare key and now the car starts up every time. Pull the latch at the end of the key holder.

A keyless remote offers great convenience. (the metal blade hidden into the plastic key) and charge the battery. Check your door lock cylinder.

In order to change your chrome. Learn more about the warning signs as well as how to. How to replace battery in the mercedes c200 remote key.

There are several mercedes smart key remotes so make sure to look at the correct video. Whether your key was lost, stolen, or damaged — look to us help you put your beautiful mercedes benz back on the road! You insert the key in the ignition of your mercedes benz but nothing happens.

Diy how to take apart mercedes benz key fob chip battery and casing non destructive method duration. Take the battery compartment out. Turn the ignition to the on position.

My mechanic, who is also a friend, told me that my key was the problem. Tools needed for changing a mercedes battery. Although some batteries last much longer, most batteries begin breaking down chemically after four years, so you could experience dimmer headlights and other negative effects before you have a dead battery in your c230 that you need to.

The current smart key fob is the chrome key with a. Replacement mercedes benz keys are either ‘replacement/master’ or ‘spare’ keys. The smart keys are fitted with small batteries like those used in watches.

If you have recently lost your key, don’t fret! Ad smart key 3 button 434mhz for mercedes benz Chrome key battery replacement steps.

How To Freeze Blueberries Uk

This is known as flash freezing and will ensure that the berries freeze individually, rather than in big, unmanageable clumps. Place the raspberries to the drying trays of the food dehydrator, keeping adequate space between them.

Pin on Misc

Wash the berries with water, making sure they are clean and allow them to dry on paper towel.

How to freeze blueberries uk. 57% dried blueberries, 22% sugar, 21% fructose syrup <1% citric acid. These steps are good for dehydrating cranberries, blueberries, and blackberries also. During the freeze drying process, the whole blueberries have been dried naturally without any sugar, preservatives or additives being added.

This will take a couple of hours. Remove any stems and any shriveled or moldy blueberries. When autocomplete results are available use up and down arrows to review and enter to select.

Butter and margarine can be frozen for 3 months. If you need to defrost them, it’s best to put them in a bowl of room temperature water. The best way to freeze blueberries (along with strawberries and other berries) is in a single layer on a sheet pan.

Freeze dried blueberries are have been dried in their whole form to create the perfect store cupboard ingredients for keen bakers. Blueberries (enough to fill a pie plate or whatever at least 3/4 full) 3/4 cup brown sugar; Spread the whole, washed mulberries in a single layer on a baking sheet or on plates.

Naturally sweet blueberries grow extra large in the early summer. Transfer the baking sheet to the freezer and freeze the berries (leave for 8 hours or overnight). For more varieties of blueberries take a look at our category page.

Grated cheese can be frozen for up to 4 months and can be used straight from the freezer. Touch device users, explore by touch or. Please fill in the form below if you'd like to be notified when it becomes available.

This recipe is ridiculously easy. Placing a second towel on top and gently massaging them to dry helps speed things up. Milk will freeze for 1 month.

Allow to air dry on an absorbant. Place the tray in the freezer to flash freeze. Most bread, except crusty varieties such as french bread, will freeze well for up to 3 months.

Put the blueberries in the dish. Then, return your berries to the freezer. Spread the blueberries on a rimmed baking sheet in an even layer.

This product is currently sold out. Be sure the berries are in a single layer so that they can freeze quickly and evenly. Freezing the berries in a single layer will ensure that the berries will remain separate once they are frozen.

Flash freeze grab a baking tray and line it with baking paper. Return to the freezer for up to 4 months. Preservative free, gluten free, vegan.

Just the water is taken away. Dry berries gently with a towel (not necessary, but makes the blueberries completely ice free). Buying in bulk can help save time, money and packaging and is more convenient for small business owners and those who live a healthy, balanced lifestyle.

Sitting in the sun and savoring the sweet flavor of blueberries as we put them away by the pint. Fast freeze can be turned down after this. A cup of blueberries will defrost in approximately 5 minutes.

Place your strawberry slices on the tray, trying to ensure none of the pieces are touching each other as they will freeze together. 1/2 cup flour (unbleached, whole wheat, whatever; It doesn't effect the texture much) 1/3 cup butter, softened;

Simply remove them from the freezer, rinse them, and add them to your food. Sliced bread can be toasted from frozen. Place blueberries in a single layer on a cookie sheet or jelly roll pan.

All you have to do then is drain them, dry them, and use them in your recipe. Pour the berries onto the baking sheet and pick out any smashed berries, leaves, twigs, etc. Once frozen, the individual berries can be removed from the baking sheet and transferred to your choice of storage container, then returned to the freezer.

Storage instructions store in normal ambient conditions, in a cool and dry place (max preservation temperature 21οc & relatively humidity 65%). 100g of freeze dried blueberries is the equivalent of 800g of blueberries. This process leaves behind all of the natural goodness of blueberries.

Freeze the fruit, uncovered, for at least 2 hours. Press out as much air as possible before sealing tightly. Yep, it’s a sight for sore eyes—and a sure sign summer has.

Eat as a snack, or ideal for adding to muesli. Freeze the blueberries on the baking sheet until solid, about 4 hours. Remove the tray from the freezer and place the frozen strawberries in a labelled freezer bag.

Mix the remaining ingredients in a bowl with a fork.

How Long Does It Take For Carpet To Dry After Steam Cleaning

As we previously mentioned, it usually takes between 6 and 12 hours. Yet only one, dry powder cleaning, is a true dry clean method.

Pin on Carpet & Upholstery Cleaning

Steam cleaning is a method that can be used periodically but should not be used regularly, as it can wear on the carpets unnecessarily.

How long does it take for carpet to dry after steam cleaning. White glove vip laundry service. Just $1.39 a lb get a free laundry bag at signup. Wanting to know is fair considering most professionals recommend avoiding foot traffic until the carpets are completely dry.

We service nassau and suffolk county. Does cold air dry carpet? Sometimes carpets can take longer to.

Ad never do laundry again! Finally, steam cleaners can often leave moisture in the carpet, which can take upwards of 24 hours to dry. Use code nanny10 $ get $10 on us.

Taking care of the moisture quickly prevents the opportunity for mildew growth, thereby eliminating the risk of bacterial growth and associated odor. Just $1.39 a lb get a free laundry bag at signup. Two fans can dry your carpet in as little as 20 minutes.

Carpet cleaning dry time after cleaning cleaning the carpets can only take about 30 minutes in each room, but the drying time takes much longer. Steam cleaning can take anywhere from 8 to 24 hours to completely dry. With one floor being dried while the next room is being cleaned, you can be back on your wonderfully clean.

So let’s get into it and look at carpet dry cleaning vs steam cleaning and the pro’s and con’s of each. However, it only takes 4 to 8 hours to dry when carpets are cleaned without the use of traditional steam cleaning methods that use large amounts of water due to their reliance on soaps and shampoos. How long does it take for carpet to dry after getting carpets professionally steam cleaned?

Use code nanny10 $ get $10 on us. However, this drying time can be reduced, but walking on the carpet when it is wet is not commendable. There are 3 main types of carpet dry cleaning.

Unfortunately, if you hire the wrong carpet cleaner, it…continue reading → For instance, using hot steam will leave less water in the carpet fabric than shampoo cleaning. The others use some moisture but all come under the banner of dry cleaning due to quick drying times.

Drying carpet after carpet cleaning should always be a focal point to keep things from smelling musty. Ideally, avoid heavy traffic and keep children and pets off the carpet for at least 6 hours after cleaning. If your house has been flooded or there’s been a significant leak, it will take longer to dry.

Although typically it should only take a couple of hours or overnight for your carpet to dry, sometimes it will take longer. On average, home carpets usually take around 6 to 12 hours to dry after cleaning. It should take no longer than 2 hours for your carpet to dry after getting them steam cleaned.

When steam cleaning or shampooing the carpeting in your home, you may succeed in getting the carpet clean but are left with moisture that requires removal. Professional carpet cleaning equipment can draw up more water, than store bought steam cleaners, which reduces the time to dry. White glove vip laundry service.

Ad never do laundry again! Can you walk on the carpet after cleaning? Professional tips for fast drying of your carpet.

When steam cleaning is done using very hot water, the carpet will dry faster due to evaporation and the extraction of the liquid from by the powerful vacuum. If you must walk across the carpet to get to another part of the house, do it 30 minutes. When done properly, it should take no longer than 2 hours for your carpet to dry after getting them steam cleaned.

This process pulls moisture out of that surface and moves it away. After they invest in a deep professional carpet cleaning, many homeowners want to know how long to expect the carpets will be damp until they are fully dry. We service nassau and suffolk county.

However, some rugs can feel moist for up to 24 hours, depending on the time of year and humidity. In fact during the summer, the carpet will take just 2 to 4 hours to dry completely after steam cleaning. After a p rofessional clean, you can expect your carpet to feel wet or damp for at least six to ten hours.

The carpet cleaning specialist will conduct an inspection to determine. How long it takes for carpet to dry can vary but usually it shouldn’t take more than half a day. As you can imagine, airflow is a major factor in reducing the time your carpet requires to dry.

The 6 to 12 hours range. Most probably, the carpet takes 10 to 12 hours in drying entirely after cleaning. During the winter season, carpets usually take a little longer time to dry.

Letting your carpet gather dirt and debris for a long time means it will take. Steam cleaning your carpet yourself or having it done by a professional carpet cleaner on a regular basis will keep your carpet looking its best. In general, turning on your air conditioning or fans will help accelerate dry times.

Have your carpet cleaned more often: If it takes longer than this not enough water was extracted as the conclusion of the cleaning process. How long does it take for carpet to dry after getting carpets professionally steam cleaned?

Drying time depends on humidity levels, airflow to the room(s) cleaned, and the type of carpet. When you have several of those in the bedroom, living room and other parts of the house, at least 10 to 15 minutes may have to be added to the average carpet cleaning time. It is the steam method that will make sure you will not wait longer for your carpet to dry and for your carpet to not be smelly after cleaning.

Therefore, you must wait for the complete drying of the carpet if you want to avoid stains on the carpet soon after it was cleaned. In addition to extracting the water during a carpet cleaning, you also want to get some air moving.

How Long Does It Take To Be An Emt In Nc

Paramedic training in north carolina. If you belong to a public safety agency, you can likely get your tuition and registration fees waived.

How long does it take to hike the AT? Appalachian Trail

How long does it take to become an emergency medical technician?

How long does it take to be an emt in nc. Each program requires its own set of training, lectures, and duration. Emr and emt have two years from the date of expiration. In the united states, obtaining an emt certification takes a minimum of three weeks to a maximum of two to four years depending upon your professional goals, national standards, and state requirements.

Also to know, how do i become a cna in nc? Becoming an emt in north carolina. Emrs require about half as much training as emts.

Keep reading, and then visit the link at the end of this post for the latest info. Accordingly, how long does it take to get an emt certification? Emt certification in north carolina is valid for a period of two years only.

If you’re interested in becoming a paramedic in north carolina, here are a few general prerequisites you’ll need to meet before applying to a paramedic training program: Meet every necessary entry requirement. Also, how long does it take to get on the cna registry?

Emt pocket certification card on your person at all times when functioning as an emt. • go to the bathroom before the test. You are required by state law to keep your original s.c.

There are a 5 steps that have to taken to become an emt in north carolina and we cover them for you in detail below: It usually takes around 120 hours of training in order to become an emt, and an aemt requires this same training plus another 350 hours. Moreover, how long does it take to become an emt basic?

1.5 weeks from the written test to appear on our credentialing website. Most paramedic programs are either 2 years long, or 1 year long. Once that happens, you're good to go, and the paper certs come in the mail in the next few weeks.

One must be a high school graduate who is at least 18 years old. Emt basic training, which leads to certification, can take as little as three weeks and as long as two years depending on one’s professional goals and the state in which one plans to practice. A north carolina credentialing information system (cis) profile must be established online prior to making application.

You should receive your s.c. Emt certification within two weeks of receiving your national registry credential. Also remember, working ft to pay your bills and being in class 40 hours a week is rough.

How long does it take to become an emt? After two years, the individual must complete an initial course. There are three possible paths to becoming a certified nurse aide i in the state of north carolina:

You can contact them at: All future emts in north carolina have to be 18 years of age and have a hs diploma/ged to gain access to approved training. It’s now possible — in just 21 days — to obtain the proper training and knowledge to take and then pass the national registry and the north carolina state emt exam.

I have been out on workman's comp. Anatomy and physiology for emts class. Aemt and paramedic have two years from.

The duration to become an emt depends on the certification level that a candidate prefers to pursue. At that point you must renew your certification the same way all other north carolina emts do. If north carolina grants you an emt certification by reciprocity, it will only be valid as long as the certification on which you were granted reciprocity remains valid.

When your original emt license expires, so will your north carolina one. If you’re not a high school graduate, a ged will suffice. To receive nc emt or aemt licensure you must reside in north carolina, attend an ems educational program in north carolina, or work for a licensed north carolina ems provider.

If you have to leave the testing room you will be required to take one form of id with you while the other stays within the testing center, and it will be verified each time you leave and enter. You are allowed to go during the exam, but take care of it sooner rather than later. The emt certificate program consists of 120 to 150 credit hours and typically takes one to two years to complete.

Certification and licensure information on oems website is a little difficult to navigate and find, but it can be assumed that with exception to reciprocity, you must successfully complete a nc.

How To Get An 8 Pack In 3 Minutes

4 bottles of prescription medication, 1 strip of pain killers, 2 alka seltzers, 5 motion sickness tablets, 1 chapstick, ear buds, menstrual cup, wax strips Make sure your back is straight and hold for the.

Level one, two, and three 30 minute at home workout plans

You will get ripped abs in only 6 minutes per day.

How to get an 8 pack in 3 minutes. Bodyweight squats (20 seconds work/10 seconds rest) x 8; Ok so now that you have the three magic numbers let’s do the math’s and get you a number! Do not place any other materials on the top or bottom of the support wrap/cold pack.

Hold yourself there with your arms fully extended. Do not apply cold pack directly to skin without support wrap. Always position the rounded side of blue modules toward the affected area.

Lie with your back on the floor, knees bent, and feet flat on the floor. Get the exact protocol & programming i used to get six pack abs in 8 weeks here. This woman is drop dead gorgeous!

Service packs take about 30 minutes to install, and you'll need to restart your computer about halfway through the installation. I usually leave for a trip with the bag expanded and then zip it up as items get used and i don’t need as much space. It involves discipline and a commitment to clean, healthy eating and regular exercise, including cardio and strength training.

In the table below are links that take you directly to the latest microsoft windows service packs and major updates for each operating system. July 30, 2012 by joel runyon 189 comments. How to get a six pack abs in only 3 minutes with coach kozak.

Crunches can firm and strengthen your abdominal muscles, and help you get an 8 pack. 34 pounds in 8 weeks: Watch later remove cinema mode.

How to get six pack abs doing this very powerful workout. The recommended (and easiest) way to get updates such as service packs is to turn on windows update for windows 8.1 and let windows notify you. In addition to strength training, do as much cardio as you can to burn any excess fat around your waist.

Six pack tabata workout (60 minutes) set #1: If you want six pack abs and more inof go to *******www***py****. When you first start working on your six pack, try to exercise 3 days a week for 20 to 30 minutes at a time.

Your left leg should be stacked directly over your right leg. Push ups (20 seconds work/10 seconds rest) x 8; This six pack abs workout is best used with hasfit’s six pack diet.

How i got 6 pack abs and dropped to 5.4% body fat without stepping foot in a gym. Mountain climbers (20 seconds work/10 seconds rest) x 8; Freeze the cryomax cold pack for at least 6 hours before use.

Keep your elbow bent directly under your shoulder. The easiest way to install the latest windows service pack or update is to run windows update. Dumbbell bent over row (20 seconds work/10 seconds rest) x 8

Get a gallon jug, fill it up in the morning and every time you’re are hungry, jug water before you reach for food. For the best six pack workout possible, perform exercises that target your abs like crunches, leg raises, and planks. If you’d like to see better photos than the “mirror” shots here, you can see a selection of the photos from our.

Place the support wrap/cold pack flat in the freezer. Start by lying on your right side with your right elbow bent directly under your shoulder.

How To Make Aloe Vera Gel Without Blender

Try to get just the edge because it is difficult to get the gel out of those pieces. Blend the juice on a low setting for a few minutes, until the gel dissolves.

How To Make Aloe Vera Gel Without a Blender Quick Tip in

Use the knife to trim off the serrated edges on both sides.

How to make aloe vera gel without blender. You can extract the aloe from a live aloe plant, and the entire process only takes about 15 minutes. Remove the edges and sides of the aloe vera leaf using a knife. After you store the aloe vera gel you will use in the coming week, pour the extra gel into ice cube trays and freeze until solid.

Blend aloe vera gel with oranges for a simple sipper. Large aloe vera leaf or aloe plant; Take an aloe vera leaf and clean it to remove dirt.

Using a small spoon, scoop it into your blender. Pour this gel into a silicon ice tray and freeze them. Once the leaf has been peeled, you will see the natural aloe vera gel.

This makes it a little more manageable. According to a report in the indian journal of dermatology journal, the inner gel contains 99 percent. Blend the ingredients until the mixture becomes smooth and the consistency is cohesive.

Slices of the edges of the aloe leaf to remove thrones. Cut off the serrated edge. Cut the leaf into sections about 8″ long.

A white gel will appear in the front, and that is the main part of aloe vera juice. Now, let’s have a look at the steps that must be followed for this method —. Blend the aloe vera gel until it is frothy and liquefied, which will not take.

Then, pop this base into your blender and add the aloe vera gel to it; Cut the 8″ lengths into 2 or 3 long strips. Then transfer the aloe cubes into a freezer safe container or bag.

Sharp knife (i got this knife set and they are surprisingly good for a really cheap price!) cutting board; You can also blend the gel with 16 fluid ounces (470 ml) of orange juice (with or without pulp) if you don’t have fresh oranges. Next, cut off the green skin by running a sharp knife between the aloe vera gel and the skin.

Place 2 tablespoons (6.0 tsp) of aloe vera gel and 3 whole oranges (peeled) into a blender and set it to high speed for 30 seconds to 1 minute. Place two tablespoons of this gel into a hand blender. Clean jar or bowl with a lid (i’m using a pyrex bowl from my kitchen)

If you have ever wondered how to make aloe vera gel, help is on the way. Using a tablespoon, make sure to scoop the gel into your blender. Add one cup of orange juice to the blender.

| pure aloe vera gel, aloe vera gel, what is aloe vera. To make aloe vera ice cube, first, extract fresh aloe vera gel and strain the gel using a cheese/muslin cloth. Thus, the aloe vera gel can last longer using this method.

Directions on how to make aloe vera gel: Method to make aloe vera juice without blender take an aloe vera leaf and cut it in half from the front. However, if you plan on keeping it for more than 1 week, you should add preservatives.

First off, pour the alcohol, distilled water, germ destroyer oil, and aloe vera gel into a small container. And your diy aloe vera butter is all ready to go! When you are done, you will have fresh aloe vera to use for all of your beauty diys including homemade hand sanitizer.

Blend the gel until it's frothy and liquefied, which should only take a few seconds. Be careful handling the leaf as it is very slippery while. 20 drops of germ destroyer oil.

Do well not to add any of the pieces of the plant’s skin into the blender. 1/3 cup of aloe vera gel (avoid aloe vera lotion). Take a fork and a bowl;

Follow the steps written in the first section to scoop out the aloe gel and store them in a small bowl. Slice that white gel part into the bowl, as much as possible. Clean bowl (if you are using an immersion blender).

Transfer the aloe vera gel into a plastic container that has a lid. To thicken the liquid, you’ll need xanthan gum (or a similar gum powder). A few drops of essential oil for scent (optional).

This makes it easier to handle. 3 tablespoons of distilled water to thin the solution. At this point, your gel is ready to use.

Aloe ice cubes have multiple uses such as they can be added to our smoothies, face or. Lastly, take your formula out of the blender and pour it in your container. How to make aloe vera gel without a blender.

Just like the other gel, this simple recipe uses only two main ingredients. Add the aloe vera cubes in a. Once you have successfully peeled the aloe vera leaf, you will see the natural aloe vera gel in the middle.

To make aloe vera oil using heat method, you need ½ cup fresh aloe vera gel and ½ cup coconut oil. Slice the aloe vera in half, lengthwise, trying to slice it so you have two pieces with an even thickness. Pull out an aloe cube as needed for burns or to use in one of the above recipes.

How to make aloe vera gel without a blender quick tip in case you are not near a blender. For every 1/4 cup (60 ml) of aloe vera gel you make, add 500 mg of powdered vitamin c or 400 international units (iu) of powdered vitamin e — or. Be careful not to include any pieces of the aloe vera skin.

How to make aloe vera gel. Cut the aloe vera leaf into cubes. Slide the knife just under the skin on one side to slice it off.

Take a big size aloe vera leaf, cut off the ends that give out yellow liquid.

How To Remove Paint From Hardwood Floors Without Sanding

Avoid sanding unless it’s absolutely necessary Overspray can occur when you are painting an area and accidentally splatter the paint onto your hardwood floors.

How To Remove Wood Stain Without Sanding Cleaning

Can you redo your hardwood floors without sanding?

How to remove paint from hardwood floors without sanding. How to paint a wooden floor without sanding? How to remove paint from wood floors with a heat gun using one of our favorite heat guns is one way to soften paint so you can remove it from your floor. You can use a plastic putty knife to remove the paint without damaging the surface of the wood floor.

To remove dried paint from hardwood floors, you can sand it or use a paint scraper, soap, and water. How to get paint off hardwood floors without sanding? The suggestions stated above should help you with everything in terms of how to get rid off paint from a hardwood floor.

Use a toothbrush to wipe away the paint stain until it gets completely removed. You can as well use a hammer to tap the putty knife in the case of hard paint spots. I'm an artist and had discovered action painting by accident so there is acrylic paint all over my hardwood floors in large amounts.

The sudden pressure should help lift up the corner of dried paint. How to remove paint from a laminate wood floor Carefully rub a wax stick, forcing wax into the scratched area.

Refinish hardwood floors without sanding paint and glue removal removing paint dots from hardwood floor without sanding you hardwood floors how to remove old paint from read everbright flooring. (you can rent a buffing machine for half or full day.) then you apply a topcoat of finish. Other ways of changing the shade of hardwood flooring include sanding, painting, and whitewashing.

Dab the area with a soft and dry cloth so that the floor does not get too wet during the whole process. Rinse the area using a damp rag and allow it to dry. I tried rubbing alcohol it works but it takes a lot and you have to cover it and wait, then scrape it off like gum.

The wax fills in the scratched area, leaving the hardwood looking spotless. Place the wet rag on the stain and allow it to soak in the wood to bleach out the stain. You can also use rubbing alcohol, denatured alcohol, a paint removing solvent, paint.

Utilize a plastic scrapper to get off as much paint as you can off the floor. In the case of dried paint in the joints between two boards, you can use a pull scraper to gently remove the paint from wood grain depression and the sides of the two boards. Excess water on old wood floors can worsen the situation you are trying to control.

Another option is to try using a rejuvenator type wood floor cleaner on the stain. Spills from ink, coffee, tea, juices, paint, chemicals, or pet messes can cause dark stains on your wood floor. Dried paint can be a challenge to remove from hardwood flooring without causing major damage, especially if the paint is oil based.

First you lightly sand the surface of the old finish using a floor buffing machine and a special sanding screen, shown in photo 5. Many chemical cleaners are too harsh to use on this. To get paint off your hardwood floor without sanding, follow the steps below:

1.) current hardwood floors are in bad condition (& you don’t have the budget to replace) 2.) current hardwood floors are outdated (& you don’t have the budget to replace) 3.) love the look of painted floors (this isn’t about $$) Allow the floor to dry. Remove paint hardwood floors without sanding.

Hoover it and sweep it and, if necessary, remove any dirt that could hinder the process of painting. This sort of paint dries rather quickly because the moisture in it evaporates. Kilz kitchen & bath primer porch paint (i used behr porch paint) wood filler.

With this you get a perfect finish, in addition to ending the grease and dirt. Pressure helps remove stubborn paint stains without scuffing the floor. We recommend doing it with a solution of vinegar and water or with a special cleaning liquid for wooden floors.

Caution must be taken to prevent harming the finish or gouging the wood. Here’s a brief overview of each of these alternatives: Soak a cotton rag with hydrogen peroxide.

Like magic gone in 60 sec's. Here’s how to go about it: These paints aren’t as durable or as shiny as other paints, but they’re very easy to wash up after.

Create a cleaning solution by mixing up a small amount of lemon juice with about three times as much rubbing alcohol. Remove the rag, and wipe up any excess hydrogen peroxide. Use a damp mop to remove these spills immediately.

The process sounds easy, and it is. Buff the area using a soft cloth and remove excess wax. Top reasons people consider painting hardwood floors:

This reveals a fresh layer of wood, which typically has a slightly different hue. Finger nail polish remover works perfect! However, it is not impossible.

Typically, overspray is several small drops of paint rather than a large spill, but it&#039;s difficult to remove without harming your hardwood floors. Use a hammer to apply pressure to your paint scraper.

How To Make Your Car Ac Blow Colder Air

This will allow the system to blow cold, but just not as cold as it used to. Although air condition gives you cold air, you can get colder air if you properly maintain some things.

AC Evaporator; 8790 Jeep Cherokee XJ, 4.0L Crawltech

In some cars, when you put the pedal to the metal, the ac.

How to make your car ac blow colder air. These 4 things are the most common reasons why an ac doesn’t blow cold air. One super simple tip is to turn the ac vents going to the passenger side off. Dirty ac air filter dirty air filters will decrease the air flow and reduce efficiency.

To start with, just remember that it’s a myth that if you turn on the ac at maximum speed in the beginning, then your car will cool down quickly or rapidly. The car ac unit runs off of the engine itself. It is possible that the system has a small leak, and now is low on refrigerant.

Unfortunately this will not help. Try air conditioning coil cleaning. If you have ac then you need to top it.

The only way to make it colder is to set the thermostat colder in the evaporator or clean the muck out of the evaporator fins test the temperature at the vent by placing the thermometer in the vent and it should be around 10 degrees c the temperature is not taken in the car as there is too much thermal efficiency lost form the vehicle Usually there is a control wheel on each air vent that allows you to position and point the air flow. How can i make my car ac colder?

Blend air door is the reason for drawing hot air to cold air in your car system. There are various refrigerants on the market to the average joe. By shutting off unused vents, your vent will blow out colder air faster.

Stuck & blend air door. For example, your ac not cooling well might be because your ac coils are clogged and you need air conditioner cleaning. If you are talking about the temperature setting knob that your turn from red for warm to blue for cold, then that knob controls how much of the air is mixed from the heater (from the hot engine) versus from the cooler (the ac).

If the filter is dirty, it can block ac airflow. This door is located in the ventilation system. To minimize the heat in the car and get your ac to blow cold air as fast as possible… start your cars engine, turn the blower fan to the maximum speed and then turn on the a/c by pressing the ac button.

With a relatively new vehicle, say a 2009 ford product using r134, what could you do to make the a/c blow colder? No, but it'll stop your coolent system from freezing. So, make sure that you check the compressor as it could be the reason why car ac not blowing cold air after recharge.

During this warm time i was wondering if adding more antifreeze to the coolant system will help the air blowers blow colder? The cabin air filter prevents pollutants from entering the car through the ac and heat vents. We’ll cover what can cause your car’s ac to only blow hot or cold on one side, what other symptoms you might hear, and how to diagnose the blend door actuator if you think it’s the cause.

The best way to do this is to crack the windows (open sunroof also if you have that) and run the ac with outside ventilation. When the ac is of. How to make car ac colder.

This will help determine if the air conditioning is working efficiently. Change the ac air filter with a medium grade pleated filter for maximum efficiency. If the car ac blows cold air on one side and hot on the other, there are a few different causes but it’s likely the blend door actuator, also known as the temperature blend door actuator or vent mode door actuator.

If you shut the a/c vents directed to the. Close all the windows of the vehicle, and the air vents apart from the center air vent on the dashboard. This cooling season, take steps to prevent air conditioner breakdowns.

If your car ac is not cold enough, there are a few ways to make it colder. If you are driving alone, you can turn off the a/c vents at the passenger side. Can you make your car a/c colder?

Must read 18 winter car hacks that will blow your mind!. Here is what some of my car buddies suggested. Measure the temperature outside the vehicle.

2) remove r134 and put in r12 When the car is moving, versus stopped, there is more air flow over the condenser (the heat exchanger in front of the radiator) and that airflow is essential to system operation. 1) use one of the refrigerant additives that advertise 10 degrees colder air temp.

Yes, there are ways to make your car a/c colder and blow out cold air faster. Now finally after all the above steps, we move towards switching on your car’s ac. Excessive sun heating can make your car cabin hot even when your air conditioning is on.

Also to know is, how can i make my car ac colder again? The answer here is two fold. If the system is functioning properly and the system pressures are correct then you more than likely have an issue with the blend doors under the dash.

Start the engine and turn the air conditioner to the coldest setting possible, and with the fan at its slowest. Vents usually have a control wheel that allow you to control the direction of the air flow and shut off the vent. They can boost cooling power, and your car cabin will turn cold quickly.

Open the sunroof to let hot air escape. If it is low on refrigerant add refrigerant or a refrigerant with a stop. This is the best method to use car air conditioner settings.

To maintain airflow when the car is in stop and go traffic, or is completely stopped, condenser fans will. If you’re the only one in the car, turn the ac vents to the passenger side off. It is definitely not cool when your air conditioning system has a meltdown during a heat wave.

Open all the windows in your car and select outside air mode to allow the blowing air to push the hot air out of your car and the ac system itself. If the blend doors under the dash are working fine then the heater core should be completely blocked out when the a/c is on. My car currently has pink coolant which has not been changed for at least 2 years!

How You Spell Electricity

Common misspellings of the word electricity are: In 10%of cases electricityforis used.

hc Smith Corona Electric Typewriter WP1100 Word Processor

The verb lead is pronounced /leed/, with a long e;

How you spell electricity. On a hit, the ray deals 1d3 damage of the chosen energy type. Needstorm (best with lightning happening. Common searches that lead to this page:

Google has many special features to help you find exactly what you're looking for. Acid, cold, electricity, or fire. You can release this stored electricity by making a melee touch attack.

Why david lynch is fascinated with electricity and thinks you should be too. Spell requirements [edit | edit source] “solid waste is a very complex source of fuel, if you can even call it a fuel,” explains carmine trecroci, an economist at university of brescia, italy.

You fire a ray at the target, and you must make a ranged attack against its eac. The electricity spell is an intermediate spell that generates a large electric charge. The spell gains that descriptor.

The procedure for electricityconnection looks even sadder. The noun that refers to a position or advantage is also pronounced /leed/, with a long e; Fandom apps take your favorite fandoms with you and never miss a beat.

This page is a spellcheck for word electricity. The electricity spell creates electric charges, not energy, please see the sparks fly spell for energy. Upon completing the casting of this spell, elemental energy infuses your hands.

Added in classic world of warcraft. A physical phenomenon associated with stationary or moving electrons and protons. Spell resistance yes description when you cast this spell, choose acid, cold, electricity, or fire;

An important form of energy that is found in nature but that can be artificially produced by rubbing together two unlike things (as glass and silk), by the action of chemicals, or by means of a generator. You can cause electricity to flow too fast into a machine or not at all. Electroconvulsive, electroconvulsive therapy, electrocorticogram, electrocorticography, electrocratic, electrocute, electrocyte, electrode, electrode efficiency,.

Electricity the correct spelling is: Read electricity spell from the story spells :) by earthfromjupiter (jupiter) with 1,784 reads. In the uncategorized spells category.

How to spell electricity, correct spelling of electricity, how is. You gain a melee touch attack causing 1d6 points of damage of that energy type, along with a special effect described below. If you take electricity damage while this spell is active, some of the energy is stored on your skin, as with holding the charge on a touch spell.

Energy made available by the flow of electric charge through a conductor. I have a water maker, and solar panels for electricity. The charge is able to power electrical appliances for a short amount of time.

The noun that refers to the metal, however, is pronounced /led/,. Surrounds you with electricity, dealing 10 nature damage to any who strike you for 15 sec. Search the world's information, including webpages, images, videos and more.

The price of electricity for homes has shot up 27% in the first days of the year and has reached 16.81 cents per kilowatt hour (kwh) in the regulated electricity tariff (pvpc), when in the same period last year it cost 13.24 cents, according to data from the consumer organization facua. You gain a +3 bonus on the attack roll if your opponent is wearing metal armor, is carrying a metal weapon, or is made of metal. Electricity is the correct spelling of this word.some example sentences are:there electricity suddenly cut out.we will be changing our electricity.

All which is correct spellings and definitions, including electricity or electricity are based on official english dictionaries, which means you can browse our website with confidence!

How To Highlight In Pages On Google Chrome

Secure your telephone with google safe browsing Google news / featured snippets highlight relevant text on pages from google search.

Joico Vero KPAK Color Age Defy Swatch Chart. Joico

You can tap on any word or expression to begin a google search while still on the page you are getting a charge out of.

How to highlight in pages on google chrome. Type a search term + alt + enter. Additor helps you to organize bookmarks and highlights from article, blog, pdf, and etc into notes. That will open the page in the shot below.

Diigo, primarily a research tool, is a way to focus and highlight important parts of an article and save it for viewing later. Google has announced that “fast page” labels are now being tested on chrome for android, with the idea being that the new feature will highlight pages that offer a better experience. The extension also saves the highlights on the website pages.

Change the default highlight color. Automatically finds and highlights words and phrases on the web page according to your list. Click visit your highlighted pages on that page.

You should see the “copy link to highlight. An update to google chrome will highlight certain pages with a “fast page” label. Yawas automatically recreates your highlights when you reopen web pages.

Now thankfully, google chrome launches a new extension (link to text fragment) all aimed to help its users share highlighted text from a website or blog easily. Those who wish to try it today can navigate to chrome://flags and enable “context menu performance info and remote hint fetching”. This extension does not sync across devices, or make backups.

We built additor for chrome to help you easily collect web content like news articles, pdf reports, youtube videos, and etc. 4,3/5 (242) Primary — highlight mode shortcut (`) press the (`) key on the keyboard (below the “esc” key, next to the “1” key, above the “tab” key).

The link to highlight feature is already hitting desktop versions of chrome, and it should be coming to android and ios soon. Your digital place for focus. You can write notes, build a wiki, and collaborate on the same page.

Ctrl + l or alt + d or f6. 2,8/5 (64) Copy all your highlights to your clipboard easily.

Type a site name + ctrl + enter. Featured on product hunt and chrome web store 🙀 🙀 additor is your flexible knowledge base to organize various types of content, even with your team. Also new is a more streamlined approach.

Google has added a new link to highlight feature in chrome that makes it a breeze to share a highlight and share the text you want with your friends or colleagues. Remove predictions from your address bar. Secondary — backup shortcut (ctrl+shift.

Google’s definition of providing a. When this feature is rolled out to everyone in the final version of chrome 85, users will see “fast page” labelling if they have lite mode or “make searches and browsing better” turned on. To use the service, you have to register for a free diigo account.

Then click extensions and options under yellow highlighter pen for web to open the shot below. Select existing highlights with a simple click to either. You can tap on your #1 news destinations or online media straightforwardly from the new tab page.

As of this writing though, it only seems to work properly in google chrome. Change the keyboard shortcut through chrome settings at 'chrome://extensions/shortcuts'. With this extension, users can link the specific text fragments of a web page and later on can easily share the link with friends or colleagues whomever they want to show it.

That’s determined based on whether they provide a good user experience. To open the saved pages, click the customize google chrome button at the top right of the browser and select settings form the menu. A new link to highlight feature in google chrome.

Open a new tab and perform a google search. Listen to background sounds to mask annoying noises and help you focus while you work, study or relax. Ctrl + k or ctrl + e.

Search from anywhere on the page. You can also link it with your facebook, twitter, google and yahoo accounts. Down arrow to highlight + shift + delete.

Jump to the address bar.

How To Remove A Pocket Door Frame

Pry off the door stops with a stiff putty knife. Assuming you're remodeling your house, expect to remove the drywall on both sides of the wall where the pocket door system will go.

Guest Bathroom 6 How to Install a Pocket Door (Johnson

Close the pocket door and ensure that the door is level and properly aligned in its track on the floor.

How to remove a pocket door frame. Step 5 ensure header is level. Take the hinges off the jamb too. Remove metal stop in top of door frame.

If this is the case, it will require major reconstructive surgery to. Have someone hold the door and release the second clip. This is a common task when you are installing new flooring that is thicker than the old flooring.

How to repair a pocket door step 1: Try to work from outside straightening and tacking track in place inside pocket. Installing the door and frame how to trim a pocket door

Release the retention clip over and the door, along with the bracket, will slide off the hanger. Shimming the track replace roller hardware; Locate the studs and avoid them as well.

Make sure frame is plumb. Repeat for the door soffit at the top jam of the door frame. You put the door back on in reverse order of the way you took it down.

Remove the screw in the sill and the jamb. Pull out a door that’s stuck in the pocket by. If this is not possible, then wall surface must be removed to gain access to the pocket.

Pocket door jambs do not have these stops but you can add them to help prevent air leaks. For the old door, remove it with a hammer and screwdriver. Place pocket door frame into opening and shim until jambs are perfectly vertical and track is absolutely level (door will not stay in position if track is not level).

The placement of this nail (in my case) is determined by your finished floor height. In addition, the w all studs will be removed to make room for a new door header and pocket door frame. The 2060 frame kit is packaged for easy transport and fast installation for either single door or.

Wall mount (barn door) hardware. Cut any nails between the jamb and rough opening with a reciprocating saw. For a door that has jumped the floor track:

The next step is to put a nail or screw in the center of each side jamb (the studs on the side of the pocket door opening). Using a pry bar, remove the lower door guide from the opening face of the door pocket by removing the two brad nails holding it in place. Fasten floor mounting bracket with

Then the pocket door frame header will rest on these nails. Adjusting the pocket door level remove side trim. Paint the top and bottom of the door two coats before you attach plates to the top of the door.

Adjusting the nut adjusting the hanger how to replace a pocket door removing the door removing the track; If track is misaligned inside door pocket: If you have to cut a hole in the wall, make sure not to cut through the door frame.

Use the putty knife to separate the stop from the frame. Using the utility knife, score the caulk and paint along the edge of the doorstop on the frame’s side with the pocket. After the mounting plates are put on the top of the door, place the pocket door trolleys into the track.

The 2060 is designed to carry heavy solid core doors (up to 400lbs each) in standard 2 x 6 timber or steel framed stud walls. The family handyman expert, rick muscoplat, will show you how remove a pocket door and install a new one. Use a pry bar under the sill if needed.

The 2060 series pocket door frame is one of the finest heavy duty commercial grade pocket door frames on the market today. 2 x 6 wall pocket door frames. With the door at an angle, you can pull it completely out of the pocket.

You need to remove the pocket door and trim. If you have this clearance and the door still rubs, the door may be warped and/or the entire pocket door assembly may be twisted. Carefully remove the door and lean it against the wall.

Pick up the door and angle it, working it out of the opening. When the second hanger is in the door opening you can remove the door from it. That is all there is to it.

Keep in mind if the house was built before 1978, it's likely that the existing walls were finished with lead. Now you’re ready to remove the old door frame. Sometimes the hardest part is getting the door out of the pocket or off the track.

With the door removed it is easy to remove the rollers. Slide door all the way across opening. Place the door stop strip onto the jambs and nail them in with a few finishing nails.

Step 2 remove the vertical door casing from both sides of the door pocket, using a nail punch and hammer to push the finish nails through the casing or a pry bar to gently lift the casing from the wall surface. How to adjust a pocket door. Pocket door locks and door pulls.

Look into the pocket with a strong flashlight to examine the frame. Cut the paint seam between the door stop and the casing, but don’t remove the casing. Designed to fit doors 80in high, 3/4 in wide, and in openings between 24in and 36in, this pocket door kit is adjustable to fit almost any doorway.

Doors will warp and twist if you don't seal the top and bottom with paint or a clear finish.